Products


PARAFFIN (C10-C13)

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



PARAFFIN (C14-C17)

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



BASE OIL HVI-2

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



BASE OIL VHVI-4

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



SODA ASH DENSE

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



SODA ASH LIGHT

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



SODIUM BICARBONATE

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



SULPHUR GRANULAR

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



SULPHUR LUMPS

All products
Описание продукта

Technical characteristics

Parameters are indicated in the attached specification

Applications

Applications

Your question was sent successfully. Thank you.



2-ETHYLHEXANOL

All products
Colourless liquid

Technical characteristics

GOST 26624-85 with Amendment 1, Superior grade
Parameters:
Color index on platinum cobalt color scheme, Hazen unit, max 10
Density at 20 °C, g/cm3 0,831-0,833
Mass fraction of 2-ethylhexanol, %, min 99
Mass fraction of 2-ethyl-4-methylpentanol, %, max 0,5
Acid number, mg KOH/g, max 0,03
Mass fraction of aldehydes and ketones (in terms of 2-ethylhexanal), %, max 0,05
Mass fraction of unsaturated compounds (in terms of 2-ethylhexenal), %, max 0,02
Mass fraction of water, %, max 0,1

Applications

For synthesis of plasticizers, stabilizers, lubricating oil additives as well as for application as solvent

Your question was sent successfully. Thank you.



ACETONE

All products
Clear colourless liquid with specific odour

Technical characteristics

GOST 2768-84 with changes 1-2, Superior grade
Parameters:
Appearance Clear, colourless liquid
Acetone by mass, %, min 99,7
Density at 200C, g/cm3, min 0,789-0,791
Water fraction by mass, %, max 0,2
Metanol by mass, %, max 0,05
Mass fraction of acids in terms of acetic acid, % 0,001
Oxidation stability of potassium permanganate, hours, min 4

Applications

As intermediate (chemical feedstock) in production of other chemicals, as formulating solvent

Your question was sent successfully. Thank you.



ALPHA-METHYLSTYRENE

All products
Colorless liquid substance

Technical characteristics

TU 38.103679-89, Superior grade
Parameters:
Appearance Colourless or pale yellow clear liquid
Alpha-Methylstyrene, %, min 99,7
N-propyl benzene and styrene in total, max 0,03
Color, Pt-Co scale (in Hazen) 10
Refraction index, at 20 °C 1,5382 - 1,5391
Phenol mass, %, max 0,0005
Water, %, max 0,02

Applications

As monomer (intermediate) in production of other chemicals (resins/polymers), for rubber production and processing

Your question was sent successfully. Thank you.



ACETONE CYANOHYDRIN

All products
Transparent yellowish liquid substance with characteristic odour, highly toxic

Technical characteristics

GOST 13198-77
Parameters:
Color, max 15
Acetone Cyanohydrin, min, % 99,4
Water, max, % 0,2
Hydrocyanic acid, max, % 0,04
Acid calculated to sulfuric acid, max, % 0,1
Insolubles absent

Applications

As raw material in production of methacrylamide, methacrylic acid, methyl methacrylate, methacrylonitrile, azo-bis-isobutyronitrile. Use for manufacture of insecticides, pharmaceuticals and components.

Your question was sent successfully. Thank you.



BASE OILS

All products
Flammable viscous liquid

Technical characteristics

Grade 150N, Grade 250N, Grade 450N, Grade 650N
Parameters as per attached specification

Applications

Used to formulate a wide variety of highest quality automotive, industrial and marine lubricants as well as diluents for additives and process oil applications.

Your question was sent successfully. Thank you.



BISPHENOL

All products
White crystals or flakes

Technical characteristics

GOST 12138-86 with Amendment 1, Grade A
Parameters:
Crystallization temperature, oC, min 156,5
Colour of solution in ethyl alcohol, platinum-cobalt scale units, max 30
Colour of melt as per platinum-cobalt scale units, max 40
Mass fraction of remains after burning , %, max 0,002
Iron fraction by mass, %, max 0,0001
Phenol fraction by mass, % , max 0,02
Water fraction by mass, %, max 0,2

Applications

As monomer (intermediate) in production of other chemicals (resins/polymers)

Your question was sent successfully. Thank you.



BUTYL ACETATE

All products
Transparent colorless or light yellow liquid

Technical characteristics

GOST 8981-78, Grade A
Parameters:
Butyl Acetate Min 99,50%
Colority, Hazen units, max 10
Density at 20°C, g/cm³ 0,809-0,811
Mass Fraction of Water Max 0,05%
Mass fraction of acids in terms of acetic acid Max 0,003%
Mass fraction of non-volatile residue, %, max 0,001
Distillation Range PI Min 123,0 ºC
Distillation Range PS Max 126,0 ºC

Applications

Used as a solvent, in coating and cleaning agents.

Your question was sent successfully. Thank you.



BUTYL ACRYLATE

All products
Colorless transparent liquid with unpleasant odour

Technical characteristics

TU 2435-002-52470063-2003, amendments 1-4
Parameters:
Mass fraction of butyl acrylate, %, min 99,5
Color, Hazen units, max 10
Mass fraction of water, % , max 0,05
Mass fraction of acrylic acid, % , max 0,005
Mass fraction of butyl propionate, %, max 0.05
Mass fraction of n-butyl alcohol, ppm, max 0,1
Mass fraction of butyl acetate, ppm, max 0,1
Mass fraction of inhibitor (p-metoxyphenol), ppm 15±5
Molecular weight 128,17
Specific weight (p), g/cm³, at 20°C 0,889
Boiling temperature, °C 147
Melting point, °C minus 64,6
Flash point:
-in closed crucible, °C 38
-in open crucible, °C 48
Self-ignition temperature, °C 280
Ignition temperature, °C 51
Solubility in water, mg/l, at 20°C 200
Solubility in organic solvents Mutual solubility with butyl alcohol
Viscosity, cps, at 25°C 0.81
Specific resistance, ohm cm 3,9×10⁹
Evaporation heat, cal/g 71

Applications

Used as an intermediate substance in the production of homo- and co-polymers with other monomers (i.e. acrylic acid and its salts, esters, amides, etc.) to produce emulsion polymers. The three major uses of polymers of acrylate esters are surface coatings, adhesives/sealants and textiles.

Your question was sent successfully. Thank you.



BOTTOM RESIDUE OF BENZENE DISTILLATION (C9)

All products
Clear liquid with colors variation from yellow-green to dark brown

Technical characteristics

Parameters:
Density at 20 0С, g/sм3,max 0,95
Iodine number, g. Iodine g. per 100 g. of product, min 40
Distillation:
- Boiling point temperature, degrees C, min 110
- 50% distilled at, degrees C., max 175
- End point temperature, degrees C, max 210
Water content, %, max 0,3

Applications

For obtaining of bright petropolymer resins used in production of paintwork materials, as solvent for paintwork materials

Your question was sent successfully. Thank you.



DIOCTYL PHTHALATE

All products
Oil liquid substance, colourless or straw-yellow, with no mechanical impurities

Technical characteristics

Parameters:
MOLECULAR WEIGHT 390 gr/mol
ESTER CONTENT % min 99.5
ASPECT Clear liquid
ODOR Slight specific
COLOUR, HAZEN Max 30
ACID VALUE ( Mg KOH/g) Max 0,1
SPECIFIC GRAVITY (200C) 0,983 ± 0,002 gr/cm3
REFRACTION INDEX (200C) 1,486 ± 0,002
FLASH POINT, 0C >195 C
VİSCOSITY (200C) cp 78-82
WATER CONTENT % Max 0,05
FREEZING POINT 0C minus 50 C

Applications

Used as a plasticiser in the processing of plastics, and in the production of paints and lacquers

Your question was sent successfully. Thank you.



ETHANOL

All products
Colourless liquid with mild but typical alcoholic odour

Technical characteristics

Parameters:
Alcohol Strength at 20 deg C, vol % 99,7 min
Water content, wt, % 0,3 max
Acids concentration calculated as acetic acid, wt, % 0,010 max
Acetic Aldehyde, wt, % 0,7 max
Croton Aldehyde, wt, % 0,1 max
Diethyl ether, wt, % 0,45 max
Density at 20 deg C, kg/l 0,792 max
Bitrex, ppm 17 max
Color as per Hazen 15 max
Acetone, ppm 500 max

Applications

Solvents, anti-freezing agents, heat transfer agents, fuels and fuel additives

Your question was sent successfully. Thank you.



ISOBUTANOL

All products
Flammable liquid

Technical characteristics

GOST 9536-79 with Amendments 1-3, Superior Grade
Parameters:
Color index on platinum cobalt color scheme, max 7
Density at 20 °C, g/cm3 0,801-0,803
Mass fraction of isobutyl alcohol, %, min 99,3
Mass fraction of acids (in terms of acetic acid), %, max 0,003
Bromine number, g of Bromine per 100 g of alcohol, max 0,05
Mass fraction of carbonyl compounds (in terms of oil aldehyde), %, max 0,03
Mass fraction of non-volatile residue, %, max 0,0025
Mass fraction of water, %, max 0,1

Applications

As solvent in paint-and-varnish industry, for manufacture of ethers, other products and etc.

Your question was sent successfully. Thank you.



NORMAL BUTYL ALCOHOL

All products
Transparent colorless flammable liquid

Technical characteristics

GOST 5208-81 with Amendments 1-3, Superior Grade
Parameters:
Color index on platinum cobalt color scheme, Hazen unit, max 10
Density at 20°C, g/cm3 0,809-0,811
Mass fraction of butyl alcohol, %, min 99,4
Mass fraction of acids (in terms of acetic acid), %, max 0,003
Bromine number, g of Bromine per 100 g of alcohol, max 0,05
Mass fraction of carbonyl compounds (in terms of oil aldehyde), %, max 0,06
Mass fraction of non-volatile residue, %, max 0,0025
Mass fraction of water, %, max 0,1

Applications

As solvent in paint-and-varnish industry, for synthesis of different types of organic products, for reagents production

Your question was sent successfully. Thank you.



FUEL OIL

All products
Viscous liquid

Technical characteristics

GOST 10585-99 with Amendment 1, Grade M-100
Parameters:
Mechanical impurities, %, max 1
Water mass fraction, %, max 1
Sulfur mass fraction, %, max 3,5
Flash point, in an open crucible, 0 C, min 110
Freezing point, 0 C, max 25
Ash, %, max, for low ash content mazut 0,05
Water soluble acidities and alkali absent
Lower heating value (dry base), kJ/kg, min 39900

Applications

Use as fuel for transport means, mobile and stationary industrial boilers and process units, use in coatings

Your question was sent successfully. Thank you.



ISOBUTYRALDEHYDE

All products
Flammable liquid

Technical characteristics

Parameters:
Appearance clear liquid
Isobutyraldehyde, %, min 99,5
n-Butyraldehyde, %, max 0,1
Water, %, max 2,5
Acid Number, mg KOH/g, max 2
Platin/Cobalt-Color, max 5
Triethanolamine (Stabilizer), % 0.002 – 0.006
Density at 20 °C 0.787 – 0.800 g/cm
Refractive Index nD bei 20 °C 1.3725 – 1.3760

Applications

Used as an intermediate in the manufacturing plasticizers, alcohols isobutanol, neopentyl glycol, solvents and polymers. It is also used as an intermediate to make pharmaceuticals, agrochemicals, vitamins, antioxidants, rubber accelerators, textile auxiliaries, perfumery and flavors

Your question was sent successfully. Thank you.



METHYL METACRILATE

All products
Flammable liquid

Technical characteristics

GOST 20370-74
Parameters:
Color, max 5
Methyl Methacrylate, min, % 99,8
Water, max, % 0,04
Mass content of free Acids, at MAK, max, % 0,004
Mass content of impurities (acetone, methanol,
methylacrylate, methylisobutyrata, methylacetate, max, % 0,15
Polymer content absence
Refractive index at 20 ° C 1,414± 0,001
Inhibitor Topanol A (6-tert-butyl-2,4-xylenol), min, ppm 10
Density at 20 ° C, g/cm3 0,942± 0,003

Applications

Monomer for production of acrylic polymers and intermediate for production of methacrylate esters, synthetic
resins, latexes, emulsions and other products

Your question was sent successfully. Thank you.



STYRENE

All products
Eeasily ignitable liquid with weak specific odour

Technical characteristics

GOST 10003-90 with Amendment 1, Superior grade
Parameters:
Styrene mass fraction, %, min 99,8
Phenylacetylene mass fraction, %, max 0,01
Divinyl benzene mass fraction, %, max 0,0005
Carbonyl compounds (as benzaldehyde) mass fraction, %, max 0,01
Peroxide compounds (as active oxygen) mass fraction, %, max. 0,0005
Polymer mass fraction, %, max 0,001
Colour, Pt-Co Scale, Hazen, max. 10
Stabilizer (para-tret-butyl-pyrocatechol) mass fraction, %, max 0,0005-0,0010

Applications

Production of expandable polystyrene, production of styrenic copolymers, manufacturing of UP/VE resins and formulated resins, FRP (fibre reinforced plastic) manufacturing in an industrial setting, production of styrene butadiene rubber, production of styrene butadiene latex, production of styrene isoprene copolymers, production of other styrene based polymeric dispersions, production of filled polyols

Your question was sent successfully. Thank you.



Crystalline solid

Technical characteristics

GOST 2081-92, Grade B
Parameters:
Mass fraction of carbamide % 98,8
Including nitrogen 46,4
Mass fraction of biuret %: 1
Mass fraction of water (drying method) % 0,2

Applications

As mineral fertilizers, as raw material in resins and glues production in industry, for manufacturing of other nitrogen compounds

Your question was sent successfully. Thank you.



POLYETHYLENE

All products
Granules

Technical characteristics

Low-density Polyethylene (LDPE 10803-020)
Parameters:
Mass share of granule from 1 till 2 mm,%, max 0,5
Mass share of granule from 5 till 8 mm,%, max 0,25
Mass share of grey and oxidized granule Not allowed
Mass share of another color granule Not allowed
Density, g/sm 3 0,9185 ± 0,0015
Fluidity melt (nominal value) with tolerance, %, g/10 minute 2,0 ± 10
Dispersal of fluidity melt within lot, %, max ± 5
Inclusions, st, max 2
Technological test for appearance of film В
Firmness to bursting, hour, min 2
Limit of fluidity while stretching, Pа (gks/см2), min 93 * 105 (95)
Strength while breaking Pа (gks/см2), min 122 * 105 (125)
Comparative lengthening while breaking, %, min 550
Mass of extractable substance, %, max 0,9
Smell and flavor of water extract, point, max 1

Applications

Widely used for manufacturing various plastic containers, bottles, tubing, plastic bags, equipment.

Your question was sent successfully. Thank you.



POLYCARBONATES

All products
Solid odourless pellets

Technical characteristics

TU 2226-173-00203335-2007, Grade PC-007, Grade PC-010

Applications

Polycarbonate, including its mixtures with other polymers, is designated for injection molding and extrusion of different structural and electric insulation goods, used in machine building, radio-, lighting-, electrical engineering, electronics, construction, optical goods production including optical discs (CD, DVD) as well as in other industries, including production of the goods contacting with food and potable water

Your question was sent successfully. Thank you.



HEAVY PYROLYSIS RESIN

All products
Dark brown to black viscous liquid

Technical characteristics

Parameters:
Kinematic viscosity at 50 degrees С, мм(2)/s, max 40
Density at 20 0С, g/sм3, min 1,03
Coking capacity,%, max 18
Sediments content, % max 0,03
Water content,% max 1
Volatilization temperature (3% of value), °С, min 180
Correlation index, min 120
Sodions content, %, max 0,005

Applications

Used as a fuel, as functional fluid (such as cable oils, transfer oils,coolants, insulators, refrigerants, hydraulic fluids)

Your question was sent successfully. Thank you.



DIESEL FUEL

All products
Liquid

Technical characteristics

GOST 305-82 with Amendments 1-6, Grade L, Grade M

Applications

Use as fuel for land and marine high-speed diesel and gas-turbine engines, use as functional fluids, use in oil and gas field drilling and production operations, lubricants, use in metal working fluids/rolling oils, use as release agents or binders, for rubber production and processing, uses in coatings

Your question was sent successfully. Thank you.



CAUSTIC SODA

All products
White granules of spherical or semispherical form

Technical characteristics

GOST 2263-79
Parameters:
NaOH, min 47
Sodium Carbonate, max 0,6
Sodium Chloride, max 0,2
Iron as Fe2O3, max 0,007
Sodium Chlorate, max 0,25

Applications

Used for example to adjust the рН, to produce biodiesel from vegetable oils, to clean bottles, in pulp and paper industry to dry air, to extract alumina, in textile industry to peel leather, to manufacture chemicals (intermediate use), to regenerate resins or to soften water. Consumers also use it for paint stripping and pipe cleaning

Your question was sent successfully. Thank you.



CARPOLACTAM

All products
White crystalline

Technical characteristics

Parameters:
Permanganate index, units, not more than 4
Color of Caprolactam water solution, mass fraction 50%, Hazen units 3
Volatile bases content, mmol/kg, not more than 0,4
Crystallization temperature, °C, not less than 68,8
Iron mass fraction,%, not more than 0,00002
Cyclohexanonoxime mass fraction, %, not more than 0,002
Optical density with mass fraction 50%, not more than 0,04
Alkalinity, mmol/kg, not more than 0,1

Applications

As raw material for manufacturing chemical fibers and filaments from polyamide resins

Your question was sent successfully. Thank you.



VACUUM GASOIL

All products
Viscous liquid

Technical characteristics

TU 38-1011804-2004 with Amendment 1-5
Parameters:
Hydrocarbon type content:
paraffin-naphthene 48,8
light aromatic 24,3
medium aromatic 9,6
heavy aromatic 14,2
gums I 1,4
gums II 1,7

Applications

Uses in coatings, use as fuel, use in road and construction applications

Your question was sent successfully. Thank you.



SULFUR

All products
Hemispherical pellets

Technical characteristics

TU 2112-002-05766540-2008 with amendmend 1
Grade: Industrial Sulfur Gas Granulated
Parameters:
Sulfur content mass, %, not more 99.98
Ash content mass, %, max 0.02
Organic additions content mass, %, max 0.01
Acids mass content in conversion to sulfuric acid, %, not more 0.0015
Water content mass, %, max 0.2
Mechanical Impurity (paper, wood, sand and others) No allowed
Mass fraction of the granules in diameter 2,0-6,0 mm. % not less than 92
Bulk Weight, kg/m3, not less than 1100

Applications

Sulfur is used in production of other chemicals and as a component substance in manufacture/formulation of chemical products, rubber products

Your question was sent successfully. Thank you.



BENZENE STILL RECTIFICATION RESIDUE C9 (SALAVAT)

All products
Transparent flammable liquid of yellow color

Technical characteristics

Parameters:
Appearance transparent liquid of yellow color with no mechanical impurities
Water, ppm 160
Density 15°C, kg/m3 932
Refractive index 20°C 1,531
Styrene, wt% 1,6
AMS, wt% 2,6
Endo-DCPD, wt% 9,3
Methyl-DCPD, wt% 0,8
Indene, wt% 18,1
Vinyltoluene, wt% 13
Methyl-Indene, wt% 6,3
Naftalene, wt% 7,7
Sulfur, ppm 580

Applications

Applications

Your question was sent successfully. Thank you.